Our range of products include nickel 201 tubes, 825 inconel wire, nickel alloy forged pipe fittings, nickel alloy forged fitting, high nickel alloy coil and high nickel alloy tubes.
Nickel 201 are solid solution strengthened, commercially pure wrought alloys. The elemental restrictions of both alloys are combined into one, dual-certified chemistry, resulting in a single alloy with the desired characteristics of both alloys
Incoloy 825 is designed to resist a variety of vigorous corrosive media such as sulfuric and phosphoric acids, nitric acid, nitrates and oxidizing salts. It offers better aqueous corrosion resistance than alloy 800 and good resistance to chlorine based conditions
Nickelforged fittings are used to connect equipment for maximum efficiency and flow. These fittings are most commonly made of nickel alloys such as Incoloy orInconel. Nickel is of high strength, low-corrosion, malleable, and ductile
Nickelforged fittings are used to connect equipment for maximum efficiency and flow. These fittings are most commonly made of nickel alloys such as Incoloy orInconel. Nickel is of high strength, low-corrosion, malleable, and ductile
High Nickel Alloy Coil is basically made up of nickel-chromium-iron alloy, which is divided into four different types such as Monel, Nickel, Inconel Alloys and Hastelloy Strip. Varying small constituents these type of high nickel alloy are formed and offered excellent features
In addition to their high melting points and resistance to oxidation and corrosion, nickel alloy tubes are very ductile – they are easily drawn out into thin tubes. They can be electroplated and are easily welded, making them suitable for use in industries where very high and low temperatures come into play
Ni-1 is used for TIG. MIG and SAW welding of Nickel 200 or 2010. This filler metalis also employed for overlaying on steel as well as repairing cast iron castings.It can also be used for dissimilar joints betwen Nickel Alloys to Stainless orFerritic Steels
Inconel 825 Flanges also resist localized attack and avoid pitting and crevice corrosion. Moreover, they are also resistant to sulfuric and phosphoric acid. They can also resist aqueous corrosion and hence can be used in marine applications. The presence of titanium prevents sensitization at the grain boundary
The specification for the fasteners is ASTM B160. The 2.4066 Nickel 200 Stud Bolts are made up of up to 99% nickel, copper, iron, manganese, carbon, silicon and sulfur in the composition. The ASTM F2281 Nickel Alloy Bolts are expensive but they are very useful in sensitive applications that are vulnerable to corrosion
Nickel is a silvery-white, hard, malleable, and ductile metal. It is a good conductor of heat and electricity. It is bivalent, that is it has a valency of two. The metal dissolves slowly in dilute acids.
Pure nickel is resistant to corrosion in water or air, and therefore is used as a protective coating. It is malleable and ductile and readily soluble in dilute acids, but is not affected by alkalis
