Stainless Steel Bright Bars

Product Details:

Manufacturing Process:Stainless steel grade 440A can be easily machined in the annealed condition. Carbide or ceramic tooling is recommended for performing machining. Chip breakers enable easy handling of tough stringy chips. As this steel has the tendency to air harden, welding is not performed; however if it is required, the steel should be preheated to 260°C (500°F) and post-weld treated at 732-760°C (1350-1400°F) for 6 h. This is followed by a slow furnace cooling to avoid cracking. Grade 440A stainless steel is annealed at 843-871°C (1550-1600°F), followed by very slow furnace cooling. For performing hot working, the materials needs to be preheated to 760°C (1400°F) and then slowly increased to 1038-1204°C (1900-2200°F) before proceeding. The material should then be cooled slowly after working and once again cooled at room temperature. Finally it must be annealed fully. This material should not be heated below 927°C (1700°F). For performing tempering, grade 440A should be soaked at 148°C (300°F). Similarly for hardening, the material should be heated slowly to 760°C (1400°F), then soaked at 1010°C (1850°F), finally air or oil cooled. 

Applications:Grade 440A stainless steel is widely used in the following applications: 

• Cutlery
• Bearings
• Gage blocks
• Molds and dies
• Valve components
• Turbine components
• Medical instruments
• Aircraft structural parts
• Knives and measuring instruments

Stainless steel is a corrosion-resistant alloy of iron, chromium and, in some cases, nickel and other metals. Completely and infinitely recyclable, stainless steel is the “green material” par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%