Stainless Steel Bar

Product Details:

Alloys 309 and 309S are austenitic chromium-nickel stainless steels that are often used for higher temperature applications. Due to their high chromium and nickel content, Alloys 309 and 309S are highly corrosion resistant, have outstanding resistance to oxidation, and excellent heat resistance while providing good strength at room and elevated temperatures. The only significant difference between 309 and 309S is the carbon content. Alloy 309S has a much less carbon composition which minimizes carbide precipitation and improves weldability.

Applications:

• Alloys 309 and 309S are used exclusively for their high temperature oxidation resistance, excellent high temperature strength, along with their resistance to creep deformation and environmental attack. 

Some examples include, but are not limited to: 

Heating elements:

• Aircraft and jet engine parts
• Heat exchangers
• Carburizing annealing products
• Sulfite handling equipment
• Kiln liners
• Boiler baffles
• Refinery and chemical processing equipment
• Auto exhaust parts

Standards:

• UNS S30900/S30908
• ASTM/ASME: UNS S30900/S30908
• EURONORM: FeMi35Cr20Cu4Mo2
• DIN: 2.4660

Product Details:

Alloy 2205 duplex stainless steel plate is a 22% Chromium, 3% Molybdenum, 5-6% Nickel nitrogen alloyed duplex stainless steel plate with high general, localized and stress corrosion resistance properties in addition to high strength and excellent impact toughness.

Product Details:

Nitronic 60 Stainless Steel is an austenitic alloy, considered to have the best galling resistance of the entire range of Stainless Steels.

Characteristics of Nitronic 60 include:

High pitting resistance

Outstanding corrosion resistance Good high temperature properties for temperatures around 982 degrees Centigrade

Oxidation resistance

Crevice corrosion and chloride pitting resistance is greater than Stainless Steel 316. Nitronic 60 can be formed using common forming techniques, and pre-heating is not required to weld Nitronic 60. Common welding methods such as gas metal arc, gas tungsten arc and submerged arc can be used to weld Nitronic 60. Hardening Nitronic 60 Stainless Steel calls for the alloy to be cold worked.

Primary Elements:

Between 16 and 18 percent Chromium

8 to 9 percent Nickel

7 to 9 percent Manganese

3.5 to 4.5 percent Silicon

Halance being Iron

Trace amounts of Carbon, Sulfur, Phosphorus and Nitrogen

Industries Served:

Oil and gas production

Hydroelectric power

Petrochemical

Food processing

Automotive

Zarine

Nharmaceutical

Construction and chemical sector.

Product Details:

Round Bar is a long, cylindrical metal bar stock that has many industrial and commercial applications. The most common application is shafts. The product is typically measured by taking its diameter. Standard diameters range from 1/4″ all the way up to 24″.

Product Details:

Round Bar is a long, cylindrical metal bar stock that has many industrial and commercial applications. The most common application is shafts. The product is typically measured by taking its diameter. Standard diameters range from 1/4″ all the way up to 24″.

Product Details:

Round Bar is a long, cylindrical metal bar stock that has many industrial and commercial applications. The most common application is shafts. The product is typically measured by taking its diameter. Standard diameters range from 1/4″ all the way up to 24″.

Product Details:

In nutshell, Bright Bars offered discover application in regions like Pump Shafts, Machined Components, Valves, Dairy Equipment, Fasteners, Machine Tools, Pins, Hinges, Surgical and Medical Parts, Threaded Bars and opposite end utilizations

Additional Information:

• Delivery Time: 7 working days

Product Details:

Nitronic 60 is an anti-galling and wear resistant austenitic stainless steel. It provides a significantly lower cost alternative to combat wear and galling when compared with cobalt-bearing and high nickel alloys. The uniform corrosion resistance of Nitronic 60 is superior to 304 in most media.Due to its grain structure, the galling resistance of Nitronic 60 is superior to that of any other stainless steel. It resists wear, tearing or freeze up of both the primary and contact materials over a wide range of service temperatures. The elevated temperature wear resistance of Nitronic 60 is excellent despite its relatively low hardness when compared with cobalt and nickel-base wear alloys. It also performs well in metal-to-metal wear in nominally inert atmospheres. The cavitation erosion resistance of Nitronic 60 is superior to the austenitic stainless steels as well as high strength duplex (ferritic-austenitic) stainless steels.

Duplex SS are two-phase alloys containing equal proportion of ferritic and austenitic phases in their microstructure, providing a combination of the corrosion resistance of austenitic stainless steels with greater strength

Stainless Steel Rods are a type of stainless steel product that is in a cylindrical shape and made up of stainless steel grades- 304, 321, and 316 most commonly. These stainless steel round bars are usually used in sectors like the food industry or construction businesses

Super Duplex is an austenitic-ferritic iron chromium – nickel alloy with molybdenum addition. It has good resistance to pitting and a very good tensile strength and high resistance to stress corrosion cracking at moderate temperatures, compared to that of conventional austenitic stainless steels

Nickel 200 and Nickel 201 are solid solution strengthened, commercially pure wrought alloys. The elemental restrictions of both alloys are combined into one, dual-certified chemistry, resulting in a single alloy with the desired characteristics of both alloys

Monel® is an alloy of nickel and copper that was first developed for commercial use in 1905. It is mainly used for its excellent corrosion and temperature resistance and is especially valued for applications in the marine and chemical processing industries

This specification establishes the requirements for seamless copper-nickel pipe and tube in straight lengths, suitable for general engineering purposes. The alloys involved are copper alloys UNS Nos. C70400, C70600, C70620, C71000, C71500,C71520, and C72200

Inconel 718 is a nickel-chromium alloy that contains supplemental amounts of columbium, iron, molybdenum, aluminum, and titanium. It is also known as nickel alloy 718. Given this alloy's durability and ductility characteristics, it has a wide range of applications in a broad spectrum of industries

The Grade 304 Square Hollow Bar is made up of the 304 grade of stainless steel which has 18% chromium and 8% nickel in the composition and possesses 515MPa minimum tensile strength, 205MPa minimum yield strength and up to 870 degrees Celsius operating temperatures

lncoloy 825 is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, copper and molybdenum to provide high levels of corrosion resistance to both moderately oxidizing and moderately reducing environments